is a Netbook

A Netbook (InterNET and noteBOOK) is a class of Laptop computer designed for wireless communication and access to the Internet. Netbook is primarily designed for web-browsing and emailing. Netbooks are gaining grounds on their compact design, slimmer looks and sleeker appeal.

Netbook is a Notebook computer with a low-powered x86-compatible processor (compatible with PC standard software), small screen (no larger than 10 inches), small keyboard, equipped with wireless connectivity, lightweight (under three pounds) and generally with no optical disk drive. They sometimes have Solid State Drives (SSDs) instead of Hard Disk Drives, which are lower capacity but have no moving parts and should, in theory, increase battery life and speed. Netbooks can run either Linux or Windows XP.

Why a Netbook

The obvious question is why should anyone buy a device with a smaller screen, slower processor, no optical drive when  you can get a full-featured notebook?

When it comes to a portable computer, the things that matter to most are speed and convenience.A Netbook is more convenient because it is lighter, and it usually has a lightweight operating system. The processor itself isn’t as powerful, but there’s much less processing that needs to be done with Windows XP or Linux in order to be usable.

If we are just looking for a portable computer to take along with us while traveling, to check e-mail, chat on Skype, watch some Youtube videos, take some notes, then a Netbook is what we want. Where as if we’re going to do intensive image editing, multimedia authoring, gaming etc then a Notebook/Laptopi is more suited for our needs.

Don’t confuse these low cost Netbooks with some of the sub-compact full featured Notebooks that are also out there. Sony, Dell and others also offer small lightweight Notebooks that have all the features of a full size computer in a tiny package but at a hefty price of $1400 and up. Some of these have plenty of power and features and up to 9 hours of battery life. These are real computers that are just packed into really small cases.

How does it compares to a regular Notebook

Let’s see the differences between a typical Netbook and a regular Notebook. Features of Dell Mini 9  Netbook  are compared with a regular sized Dell Inspiron Notebook below:

Inspiron Mini 9

Proecessor: Intel Atom Processor N270

Screen: 8.9”

Weight: 5.9lbs.

Battery: 32WHr Battery (4 cell)

Processor speed: 1.6 GHz

Memory: 1GB DDR2, 8GB SSD Memory

OS: Windows XP Home

Options: Camera, Bluetooth

Cost: $299

Inspiron 1525

Processor: Intel Pentium Dual Core T4200

Screen: 15.6” Wide Screen, Optional Hi-Res

Weight: 2.28 lbs.

Battery: 6-cell battery

Processor speed: 2 GHz

Memory: 4GB, Disk 320GB

OS: Windows Vista

Options: Camera, Bluetooth, ext Bat, More mem

Cost: $699

Pros compared to a regular Laptop:

- Excellent portability due to small size and light weight

- Good enough for basic computer tasks

- Relatively low cost

Cons compared to a regular Laptop:

- Small screen/lower resolution, small keyboard due to small size

- Limited processing power

- Hardware upgrades can be more challenging

- Due to lower processing capabilities, size and cost, advanced features are less adopted (FireWire, HDMI, etc…)

Which Netbook to buy?

It seems that Initially Netbook category was lead by Asus, Acer, but today computer giants Dell and HP jumped into the race.

According to the PcWorld.com the TOP 10 Netbooks are:

1. Asus EEE PC 1000HE

2. Acer Aspire ONE AOD150

3. Lenovo IdeaPad S10

4. Acer Aspire One (XP-Based)

5. Asus Eee PC 1000 XP

6. HP Mini 2140

7. Asus N10Jc

8. HP Mini 1000

9. Dell Inspiron Mini 9

10. MSI Wind U100

As with any purchase, you have to decide for yourself on what suits you best.

So go ahead explore the world of Netbooks and see if it’s a better choice compared to a Laptop. While the Laptop market is declining in this economy, interestingly the Netbook sales are predicted to be on the rise.

A couple of useful resources:

http://www.pcworld.com/article/154358/top_10_netbooks.html

http://tech.msn.com/products/slideshow.aspx?cp-documentid=18573429&imageindex=1

Read the original article and more blog posts about tech gadgets and shopping tips

In the box

Together with your iPod classic, you have



earphones

a USB 2.0 cable

a dock adaptor



What you also need

To use your iPod classic, you must have a computer.

Mac

A Mac requires



a USB 2.0 port

Mac OS X v10.4.11 or later

iTunes 8.0 or later



PC

A PC requires



a USB 2.0 port

Windows Vista or Windows XP (Home or Professional) with Service Pack 3 or later

iTunes 8.0 or later



Features

Your iPod classic has



a hold switch and headphones port on the top edge

a dock connector on the bottom edge

a two and a half inch colour LCD screen

a Click Wheel beneath the screen with the following buttons:

- menu - next/fast forward (??I) - play/pause (?II) - previous/rewind (I??)

a centre button



To find a menu item, move your thumb or finger around the Click Wheel

To select an item, press the centre button

To see the previous menu, press Menu





To switch on the backlight. Press any button or scroll the Click Wheel.

To view main menu. Press and hold Menu.

To adjust the volume. Use the Click Wheel.

To search for a song. Select Music on the main menu.

To search for a video. Select Videos on the main menu.

To play a song/video. Choose the song or video; press either the centre button or play/pause (?II). Please note: you cannot play songs or videos when you’ve connected the iPod classic to your computer.

To pause. Press play/pause (?II) or remove the headphones from your iPod classic.

To rewind or fast forward a song or video. Press and hold previous/rewind (I??), or next/fast forward (??I).

To play the previous song/podcast/audiobook chapter. Press previous/rewind twice (I??).

To listen to all songs in random order. Select Shuffle Songs on the main menu.

To skip to a certain part of a song or video. If you’re in the Now Playing screen, press the centre button. The scrubber bar appears with a diamond icon that indicates the current position in the song or video. Move the icon forward or backward with the Click Wheel.

To make a Genius playlist. Select or play a song; press and hold the centre button until a menu appears on the screen; select Start Genius; press centre button. Please note: Start Genius appears only when you have appropriate songs to create a Genius playlist.

To add a song to your On-The-Go playlist. Select or play a song; press and hold the centre button until a menu appears on the screen; select Add to On-The-Go; press the centre button.

To disable your iPod classic controls to prevent anything happening if you accidentally touch them. Move the hold switch to the HOLD position.

To reset your iPod classic if it doesn’t respond. Move the hold switch to HOLD and back again; press the centre and menu buttons at the same time and hold for around six seconds until the Apple logo comes on the screen.



Press and hold the centre button until a menu appears on the screen.





Go to the main menu and select Settings>About. Press the centre button until the serial number appears. The number is also on the back of your iPod classic.





Choose Search from the Music menu

Create a search word by using the Click Wheel to run through the alphabet, and the centre button to select each letter. Press the next/fast forward button (??I) for a space; press the previous/rewind button (I??) to delete a letter. Your iPod classic starts the search when you select the first letter

To see the results, press Menu





Select Cover Flow from the Music menu

Scroll through the album artwork with the Click Wheel, or use the next/fast forward (??I) and previous/rewind (I??) buttons

Choose an album

Press the centre button

Scroll through the available songs with the Click Wheel and select one

Press the centre button





Put the Dock Connector/USB cable into a USB 2.0 port on your computer

Plug the other end into your iPod classic’s dock connection





“Connected”

“Synchronising”





Click on the iTunes Eject button (?) or

for Mac users, drag the desktop iPod classic icon to Trash or

for PC users, eject iPod classic in My Computer, or select the Safely Remove Hardware icon in the Windows system tray and choose iPod classic



pull the cable from the bottom





buy items from the online iTunes store

import items from your CDs, DVDs or computer hard drive





Place a CD in your computer

Open iTunes

Select Import CD

When you’ve finished, eject the CD by selecting Eject ?



select your CD’s first song

choose File>Get Info

select Info

type in the name of the song

choose Next

when you’ve finished, select OK



Drag the appropriate folder to the iTunes heading marked Library, or

Select File>Add to Library and choose the appropriate folder





Select a song

Select File>Get Info

Select Artwork

Select Add

Go to the file containing the artwork

Select Choose

By using the slider, adjust the size of the artwork

Select Next to include artwork for another song or album

Select OK when you’ve finished



choosing a song on iTunes

selecting File>Get Info

selecting Lyrics

putting the lyrics in the text box

selecting Next to enter the lyrics for another song

clicking OK when you’ve finished





Select Add (+) or File>New Playlist

Enter a playlist name

Select Music in Library

Drag a song to the playlist





Select File>New Smart Playlist

Set up your rules





on iTunes, select the Genius button (located at the bottom of the iTunes window)

follow the instructions

connect the iPod classic to your computer and sync it





select one of your songs on iTunes

click the Genius button

set a maximum number of songs for the Genius playlist by selecting a number from the pop-up menu

select Save Playlist



select iPod classic in the source list of iTunes

choose Summary

in Options, choose “Manually manage music and video”

select Apply





select Music (or an alternative item in the iTunes source list)

drag the song or other item to the list’s iPod classic icon



select iPod classic in the source list

on your iPod classic, choose the song or other item

press Delete or Backspace on your computer keyboard





select iPod classic in the source list

choose Add (+) or File>New Playlist

type in a name for the playlist

choose the items you want in your playlist, and drag them to it





choose iPod classic in the iTunes source list

choose Movies

select “Sync movies”

select the videos you want to transfer to your iPod classic

choose Apply





connecting it to your computer (the computer must be on and not in sleep or standby mode – except for some Macs) or by

using an Apple USB Power Adaptor





To manually delete a song or other item from your iPod classic

This deletes the song or other item from your iPod classic, but retains it in your iTunes library.

To manually create a new playlist on your iPod classic

When you manage songs and videos manually, always eject your iPod classic from iTunes before disconnection.

To load videos on your iPod classic

You can add films and TV shows to your iPod classic in a similar fashion to the way you add songs (see above).

Your iPod classic syncs all videos automatically. To sync only selected videos

Select Help>iTunes Help for further details about iTunes and its features.

Charging

Your iPod classic has a built-in battery. When you charge the battery for the first time, leave it for around four hours or until the screen’s battery icon shows a full charge.

When your iPod classic’s battery runs down, it takes about two hours to reach an 80% charge, and four hours to reach a full charge.

Methods of charging

Charge your iPod classic by

Please note: (i) your computer’s USB port must be USB 2.0 (ii) the iPod classic will not sync with your computer when a “Charging, Please Wait” or “Connect to Power” message appears on the classic’s screen

A battery icon on your iPod classic screen indicates the amount of charge you have left.





Sync your Genius playlist to the iPod classic in the same way as ordinary playlists.

To load music on your iPod classic

Your iPod classic automatically syncs songs, playlists, audiobooks, videos, films, TV episodes, and podcasts in your iTunes library when you connect it to your computer. If you’ve deleted or added items to your iTunes library since you last connected the iPod classic, iTunes automatically updates the classic’s contents.

When you first connect the iPod classic to your computer, a message asks if you want automatic syncing. Please note that if you don’t want this, you can add items to your iPod classic manually.

To manage your iPod classic manually

Managing your iPod classic content manually allows you to delete and add songs and videos as you choose.

To set iTunes for manual management

To manually add a song or other item to your iPod classic





To add lyrics

View lyrics while a song is playing by

To make playlists

With iTunes, you can make your own playlists.

Smart Playlists

You can also set up a feature known as Smart Playlists. Smart Playlists update automatically when you place songs on iTunes that match your Smart Playlist rules.

Genius

Genius automatically creates playlists of songs that go well together. To activate Genius

To set up an iTunes Genius playlist





To add music already on your computer to your iTunes library

iTunes must be able to support the song file format.

Other features

When you put music in your iTunes library, you can include the album artwork and arrange for the lyrics to come up on your iPod classic screen. You can also make playlists, and set up features such as Smart Playlist and Genius.

To add album artwork

Any music you buy from the iTunes Store comes with the album artwork. Your iPod classic automatically displays this.

If you’ve imported music from a CD, and you have the album artwork on your computer, you can add it to iTunes.





iTunes uses the Internet to try to find the names of the songs on your CDs. If the names are not available on the Internet





To disconnect your iPod classic:

iTunes

iTunes is the software that enables you to buy, arrange and transfer music, videos, TV episodes, audiobooks, podcasts, and games. When you connect the iPod classic to your computer, iTunes automatically appears.

Main features

To place digital media in your iTunes library, you can

To place your audio CDs in iTunes





Other control options Your iPod classic serial number

If your iPod classic doesn’t respond to any controls, push the hold switch to the HOLD position and back again. Then, for approximately six seconds, press the Menu and centre buttons at the same time. The Apple logo will appear on your iPod classic screen.

Searching The search function

Use the search function for songs; album titles; artists’ names; playlists; podcasts; and audiobooks. You cannot use the search function for videos; notes; lyrics; contacts; or calendars.

Browsing with Cover Flow

Cover Flow displays album artwork on your iPod classic screen. The artwork appears according to the alphabetical name of the artist or group, and provides a visual method of browsing.

Connections Connecting the iPod classic to your computer

Connect the iPod classic to your computer to transfer music, videos, audiobooks, podcasts, photos, and files. The connection charges your battery at the same time.

Disconnecting

Never disconnect the iPod classic from your computer if one of the following messages is on the iPod classic’s screen:

When you see such a message, eject your iPod classic before disconnecting it.





The iPod classic controls Switching on

To switch on your iPod classic, press the Click Wheel or the centre button. The main menu then appears.

Switching off

To switch off your iPod classic, press and hold play/pause (?II).

Basic navigation

To navigate the menus of your iPod classic, use the Click wheel and the centre button.

Common control functions

The sad face appears on your iPod screen. You hear a clicking sound (the sound of the hard drive having difficulty spinning).

Have you had these 3 problems going on with your iPod? Then this method just might make your iPod start working again!

Steps

1. Turn your iPod on. Make sure the battery is charged up enough to turn it on.

2. The sad iPod or sad folder should pop up on the screen.

3. Put your ear up against the iPod and you will hear the clicking sound inside (it sounds like a car trying to start up, whenever it takes a few tries turning the keys)

4. While the iPod is still making these sounds, take the iPod in one hand, open the palm of your other hand, and smack the narrow side of the iPod against the palm of your other hand. [WARNING: This method is proven to work as an effortless way to repair iPod hard drive misalignment, but it may result in future hardware problems. This is only a TEMPORARY solution to fixing an iPod, and the problem may come back (experiences vary). Other methods of reviving a dead iPod are available below and may be much safer]

5. Continue smacking it on its side for at least 6 times, while the iPod is trying to turn on. The key is to loosen the hard drive.

6. After this is should resume normal function. If it doesn’t, read below.

7. There are several methods out there that have all successfully fixed iPods, so don’t give up hope yet.

8. If, however, you are a more hands-on type of person and don’t want to bother trying iPod aid through your computer, skip to the bottom of this steps page for info on how to open and repair internally.

9. The first reccomended steps are from Apple’s support website.

1. Try to wait 30 minutes while iPod is charging.

2. Try another FireWire or USB through Dock Connector cable.

3. Try another FireWire or USB port on your computer .

4. Try to disconnect all devices from your computer’s FireWire and USB ports.

5. Try to download and install the latest version of iPod software and iTunes. http://www.apple.com/ipod/download/

6. Try these five steps (known as the five Rs) and it would conquer most iPod issues. http://www.apple.com/support/ipod/five_rs/

7. Try to put the iPod into Disk Mode if it fails to appear on the desktop. http://docs.info.apple.com/article.html?artnum=93651

10. If none of the above has worked for you, then you should try the following:

1. Try to connect your iPod with another computer with the iPod updater pre-installed.

2. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.

1. For Mac computer:

1. Open the disk utility, hope your iPod appears there (left hand side), highlight it

2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3

3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4

4. Same as step 3, but open the “Security Options….” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.

5. Eject your iPod and do a Reset

6. Open the iPod Updater and click “Restore”

2. For Windows computer:

1. Go to folder “My Computer”

2. Hope you can see your iPod there and right click on the iPod

3. Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked

4. Now select “Format”

5. Eject your iPod and do a Reset

6. Open the iPod Updater and click “Restore”

7. In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“Partition Magic”.

3. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won’t show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it. Note:* It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iPod updater.* It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.* You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”

11. iPod still doesn’t work? Keep going with these steps.

* Diagnostic mode solution:

o If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod’s built-in Diagnostic Mode is a quick and easy way to determine if you have a “bad” iPod.

o You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.

o Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.

+ iPod 1G to 3G: “Menu” and “Play/Pause”

+ iPod 4G+ (includes Photo, Nano, Video, and Mini): “Menu” and “Select”

o The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:

+ iPod 1G to 3G: “REW”, “FFW” and “Select”

+ iPod 4G+ (includes Photo, Nano, Video, and Mini): “Back” and “Select”

o You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using “REW” and “FFW”. The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/

o Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.

* Format your iPod with a start disk:

o I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.

12. The next tutorial will teach you how to open up your iPod and attempt to fix it. This should probably be done as a last resort, for opening your iPod will most likely void your warranty. In addition, if executed wrong, your iPod may sustain permanant damage while your problem may have ben easily aided by other processes.

* The best tutorial I’ve read on how to open an iPod is here: http://forums.ipodlounge.com/showthread.php?s=&threadid=93789/

13. That tutorial is how to open a 3rd/4th Generation iPod, although most are similarly done. Google it if you’re not satisfied and want more detail; there are a lot of great sites out there.

* Once inside, there are a number of methods you can use that have all been used to fix iPod problems. Make sure the hold switch is on! You don’t want to hit a button and mess something up! The methods will be listed in order of how successful I believe they are.

14. Disconnecting the Hard Drive and Booting Method.

1. Now that your iPod is open, you should see your hard drive lying flat on top. The ribbon cable attached to the hard drive is detachable, so don’t be scared.

2. Gently pull the hard drive away from the cable in which it’s connected, while holding the cable lightly in hand. You don’t want to rip it out the motherboard.

3. Your hard drive should easily break free. Now that it’s out, you can play with it, look around, but the point is to give it a little rest.

4. Next, now that the hard drive is out, carefully flip your iPod over so you’re looking at the screen. Be careful not to rip the ribbon cable by the hold switch.

5. Take the iPod off of hold function, thus enabling the buttons once again.

6. Turn the iPod on. You may recieve an error message, and you may be able to access menus.

1. If you get an error message, try restarting the iPod.

7. Now turn the iPod off.

8. Reactivate the hold switch. Your experiment is complete.

9. Reconnect the hard drive as found before, and carefully replace the back cover. Hope it works.

15. Business Card Method.

1. Now that your iPod is open, you should see your hard drive lying flat on top.

2. Take a regular business card and fold it in half.

3. Place the folded business card on top of the hard drive. (The idea is that your iPod’s hard drive is too loose and the folded business card will put pressure on it when enclosed for a successful spin and no click. This works often). Don’t fold it more than once unless you have a reason, because more pressure on the hard drive may keep it from spinning, causing even more problems.

4. Carefully place the lid back on the iPod, making sure the card is in place correctly.

5. Close up your iPod and hope it works.

16. Time to Spend Some $$ Method.

1. Get a job.

2. You probably have a hardware problem (like me), and you probably need a new hard drive. Google it. eBay it. A regular replacement hard drive isn’t as much as a new iPod, but you’ll have to shell out a couple bucks if you want it fixed.

3. Look at it as an opportunity to upgrade. Maybe look into buying a bigger hard drive to hold more useless shit. It’ll still cost less than a new iPod.

4. Read above for info on how to replace your hard drive. It’s not hard.

5. Pray it’s a hard drive problem after you bought one and can’t return it.

17. If you’ve read this far, you’ve tried everything, and your iPod still isn’t fixed, then ask someone else already. You’ve been up all night reading this tutorial and trying my methods and you’re probably sick of this anyway. Or just steal your friend’s iPod.

Tips

* Make sure that the iPod has enough battery power to turn on.

* An alternative is open up your iPod (which voids the warranty) and squeeze the drive and it’s enclosing padding. There is apparently some grounding that can come loose and this can fix things up again. This worked for me and a friend and if you are very careful when you open the case, it is less violent than smacking it around.

* You can also go to an Apple store and ask to replace the battery! They are happy to help you!

* Don’t steal your friend’s iPod.

Warnings

* Before trying these methods, contact Apple and see if you can get your iPod replaced for free.

* This method should only be as a last resort. If Apple’s suggestions do not work, first try running a chkdsk function on your iPod.

* Do not break the hard drive!

Courtesy of www.ipods-world.com

, the best place for your iPod.

Switch the ipod to manual update and enable disk use: This is the first and most basic step for how to transfer music from ipod to itunes.

1. Open itunes on your old computer.

2. Connect your ipod to your old computer and wait for it to appear in itunes.

3. Select your ipod in the Source pane under the Devices section to display your ipod preferences in the main library window.

4. Click the Summary tab in the main itunes window.

5. Click the Manually manage music button. Changing from automatic updating to manual puts a check mark by Enable disk use. A message says “Disabling automatic update requires manually unmounting the ipod before each disconnect.”

6. Click OK in the message window.

7. Click Apply in the ipod preferences section of the itunes window.

2. Is there enough room on the ipod? ipod shares its hard disk space between the songs that itunes puts on it and any files you’ve added when using its disk mode. To transfer music with your ipod, you need enough free space to hold a copy of all your music files in addition to any copies that may already have been placed by itunes (this is because non-purchased songs placed on the ipod by itunes cannot be copied off the ipod while in disk mode). To figure out how much space you have on your ipod:

1. Open itunes on your old computer.

2. Click on Music in the Source pane. The size of your library appears at the bottom of the itunes window.

3. Connect your ipod to your old computer and wait for it to appear in itunes.

4. Click the ipod under the Devices section of the Source pane. The amount of free space on the ipod appears near the bottom of the itunes window.

3. Copy itunes folder to ipod To copy all your music files (including the library file that holds all your playlists and other settings) to your ipod:

1. Quit itunes.

2. Locate your ipod:

? Mac OS X: On the desktop

? Windows: In My Computer

3. Locate your itunes folder:

? Mac OS X: /Users/username/Music

? Windows: Documents and SettingsusernameMy DocumentsMy Music

4. Drag the itunes folder to the ipod. This can take a while if you have a lot of songs.

5. When the copy completes open itunes.

6. Click on the ipod in the Source pane

7. Click the Eject button in the lower right corner of the itunes window.

8. Disconnect the ipod from the computer when the “Do not disconnect” message no longer appears on the ipod screen.

4. Get itunes ready on your new computer To get itunes ready to accept all your music on your new computer:

1. Download and install the latest version of itunes.

2. Open itunes on your new computer. If this is your first time to open itunes on your new computer you will need to choose your options in the itunes Setup Assistant.

3. Connect the ipod to your new computer.

5. Copy music from ipod to new computer To copy all your music files (including the library file that holds all your playlists and other settings) to your new computer:

1. Locate your Music folder (Mac OS X) or your My Music folder (Windows) on your new computer:

? Mac OS X: /Users/username/Music

? Windows: Documents and SettingsusernameMy DocumentsMy Music

2. Drag the itunes folder in this location out to the desktop.

3. Locate the ipod on the new computer:

? Mac OS X: On the desktop.

? Windows: In My Computer.

4. Double-click on the ipod to open it.

5. Drag the itunes folder from the ipod to the Music folder (Mac OS X) or My Music Folder (Windows) on your new computer. This can take a while if you have a lot of songs.

6. Open itunes.

.